NEWS

Latest product news from SOLA

Here you can find information about our latest product news with just a few clicks or you can browse our website and find more detailed information about our products.

News

31.01.2020

MRMI Installation: THE SPECIAL PURPOSE SPIRIT LEVEL FOR INSTALLATION WORK

The MRMI Installation level from SOLA was specially developed for taking measurements during installation work. The naturally anodised profile allows you to work on sensitive surfaces without leaving marks. The laterally integrated, extra-powerful neodymium magnet and the V nut ensure optimal adhesion of the spirit level to metallic surfaces and pipes. Thanks to the printed scale with standard installation measurements, installation points can be easily transferred.

02.12.2019

MW305 & MW1000: QUICK AND SIMPLE MEASUREMENT OF SHORT AND LONG DISTANCES

The measuring wheel is the perfect tool for measuring both long and short distances, either along straight lines or around bends. This practical piece of equipment is suitable for indoor and outdoor use, and both commercial and domestic applications. The wheel is fitted with a counter, which makes it much quicker to take measurements than with a tape measure. Plus, users can easily take measurements single-handedly without assistance.

04.11.2019

RED M & BIG RED M: THE INTELLIGENT POWERHOUSES

There are normal magnetic spirit levels, and then there are the RED M & BIG RED M magnetic box-profile spirit evels. These two powerhouses aren’t just strong – they’re smart as well. They provide the user with impressive advantages thanks to an entirely new lateral magnet installation method.

11.10.2019

VECTOR 50 LASER DISTANCE METER

The VECTOR 50 measures distances of up to 50 m with an accuracy of 1.5 mm/m. It has seven measuring functions. The built-in spirit level on the VECTOR 50 is particularly useful. For horizontal measurements, it ensures that the device is correctly aligned.

21.08.2019

ENW 25 digital inclinometer

At just 25 cm, the short digital inclinometer from SOLA is ideally suited for the precise measurement of inclinations and angles with smaller contact surfaces. The ENW 25 is used, for example, for installing window sills or laying pipelines. Thanks to its compact size, the device can be easily stowed in any tool box and be transported.

04.07.2019

SCREEDING EDGE AL 2607

The new AL 2607 screeding edge from SOLA combines ergonomics and maximum stability in a new combination profile. Thanks to this new shape, it doesn’t twist even under high loads, and stays straight over its entire length.

07.05.2019

CLG

The CLG Chalk Line Reel with a 30 m cord length leaves a precise, straight and clearly visible, thick line. It is ideal for applications where a clear visible line is needed, and where the sturdiness of the cord and the Chalk Line Reel are of importance. The device is often used for timber-, road- and façade construction.

03.04.2019

ATLAS GREEN

Discover the green multiline-laser with one horizontal and three vertical lines and a measuring tolerance of only 0.20 mm/m.

07.05.2018

FLOX - The powerful professional laser for tilers and floorers

Discover the FLOX floor and cross-line laser with a front-projected floor cross and a levelled wall cross with a measuring tolerance of 0.3 mm/m or 0.5 mm/m.

02.04.2018

Plano 3D

Discover the compact universal line laser with one horizontal and two vertical 360° lines and a measuring tolerance of just 0.20 mm/m.