Discover the FLOX floor and cross-line laser with a front-projected floor cross and a levelled wall cross
with a measuring tolerance of 0.3 mm/m or 0.5 mm/m.



  • Front-projected floor cross and levelled wall cross in one laser

  • Far visible laser lines in all directions

  • Rotary foot and fine adjustment




With four laser lines that are far visible and are projected to the front and
the back of the device, it can be used even in complex spatial situations
without the need for relocation. Once set up, the FLOX can be used to
lay tiles and flooring in all possible directions.


The FLOX has a 1/4" and 5/8" thread, which can be used to attach it
easily on a tripod. This way, the levelled wall cross can also be used
when fixing tiles to walls.


The device can also be used to quickly and easily check that floors are level thanks to its horizontal laser line, which is beamed just above the ground. The floor’s properties can then be defined by using a folding rule.


By directing the laser’s floor lines close to a wall, users can easily check
that the wall is perpendicular.


Thanks to its sturdy rotary foot, the FLOX is extremely flexible in terms
of alignment: tiles can be laid out directly against the device and/or the
laser can be used as an end point reference. The additional fine adjustment also enables users to set and align the FLOX with millimetre accuracy.


Protection class IP54 ensures that the robust housing of the laser is
protected against splashes and dust.