Highlights of the Green Cross Line Laser

• Fully automatic self-leveling with ±0.2 mm/m accuracy within an incline range of ±4°
• Horizontal and vertical green laser lines project a right angle and can be adjusted individually.
• Thanks to REAL GREEN laser technology, the lines are particularly bright, sharp, and more visible.
• Permanent pulse function enables use of the optional REC LGD0 receiver over longer distances or in difficult visibility conditions.
• An optionally available inclination adapter allows you to mark inclines.
• Rotatable base for easy and rapid alignment of the line position
• Simple, intuitive operation thanks to single-button control
• Dust and water-resistant design thanks to robust IP54 housing
• 1/4” screw for horizontal and vertical measurements from a tripod
• Operating time of up to eight hours
• Compact and handy, meaning it can be easily transported.

Working with the Green Cross Line Laser CROSSLINE GREEN NX

After switching it on, the CROSSLINE GREEN NX green cross line laser aligns itself fully automatically and autonomously. The laser diodes draw a high-precision horizontal and vertical line on the wall or other surface. The laser lines meet in the middle to form a cross with precise 90-degree angles. The single button system means the CROSSLINE GREEN NX is easy and intuitive to use.

The razor-sharp green laser lines can be switched on individually at the push of a button for maximum flexibility for a wide range of tasks, meaning that, depending on the requirements, you can work with just the horizontal or vertical lines. 

The green cross line laser has a 360° rotatable base for easy and rapid alignment of the line position.

The laser also features a tilt function, enabling you to project a diagonal line, i.e., for installing a handrail. Activating this feature deactivates the laser’s self-leveling functionality. The green cross line laser flashes every four seconds when working at an angle. 

The CROSSLINE GREEN NX green cross line laser is primarily intended for use in interior areas at a range of up to 25 m, but the laser’s continuous pulse technology means it can be easily used in poor lighting conditions or over greater distances. The green cross line laser also has a permanent pulse function, which sends a stronger signal that can be read by a receiver over a distance of up to 80 m.

Where Can I Use the Green Cross Line Laser?

The CROSSLINE GREEN NX impresses thanks to its high accuracy of 0.2 mm/m, meaning it is suitable for a wide range of applications, in particular for interior construction tasks such as laying tiles, installation works, painting and wallpapering walls, drywall rail installation, carpentryp and joinery, assembling furniture, etc. However, the green cross line laser can also be used outdoors, over larger distances, or in poor lighting conditions.

The pulse functionality and handheld receiver means the CROSSLINE GREEN NX can also be used over distances of up to 80 m. The green cross line laser can also be used to mark inclines thanks to the optionally available inclination adapter, making it perfect for the installation of stairs or for painting.

Multi-Function WB Laser Wall Mount 

The magnetic WB wall mount with a rotatable base and clamp is also included in the scope of delivery of the CROSSLINE GREEN NX green cross line laser. The multi-function wall mount allows you to attach the laser device to hard-to-reach areas thanks to its versatile mounting options.

The WB wall mount is equipped with a clamp on the back for fastening to wooden slats or drywall rails, a nail hole for mounting directly on the wall, and, if you remove the clamp, an in-built magnet means the WB can be mounted on metal surfaces. It also features a 1/4“ and 5/8“ thread, meaning it can be attached to a stand. 

The laser device is mounted to the turning plate via a 1/4“ screw. For optimal alignment of the laser lines, the laser can be rotated through 360 degrees, and fine-tuned via three axes.